AMD GA-MA69VM-S2 Boot Up Floppy Seek, Password Check, HDD S.M.A.R.T. Capability, Surroundview

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40 tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.

Enabled	BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that
	BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.
Disabled	BIOS will not search for the type of floppy disk drive by track number. Note that
	there will not be any warning message if the drive installed is 360K. (Default
	value)

Password Check

System	The system can not boot and can not access to Setup page will be denied if the
	correct password is not entered at the prompt.
Setup	The system will boot, but access to Setup will be denied if the correct password
	is not entered at the prompt. (Default value)

HDD S.M.A.R.T. Capability

This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed.

Enabled	Enable HDD S.M.A.R.T. capability.
Disabled	Disable HDD S.M.A.R.T. capability.(Default value)

Init Display First

This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.

PEG	Set Init Display First to PCI Express VGA card.
PCI Slot	Set Init Display First to PCI VGA card. (Default value)
OnChip VGA	Set Init Display First to onboard VGA.

Surroundview

This option is configurable only if an ATI graphics card is installed.

Disabled	Disable the Dual-View capability. (Default value)
Enabled	Enable the Dual-View capability.

Internal Graphics Mode

Auto	Enable output from the onboard GPU when no PCI Express card is installed.
	When a PCI Express card is installed, automatically output from the PCI Ex-
	press card and disable the onboard GPU.(Default)
Disabled	Disable the onboard GPU, whether or not a PCI Express card is installed.

Frame Buffer Size

Auto	Auto-detect frame buffer size.(Default value)
32MB	Set frame buffer size to 32 MB.
64MB	Set frame buffer size to 64 MB.
128MB	Set frame buffer size to 128 MB.
256MB	Set frame buffer size to 256 MB.
512MB	Set frame buffer size to 512 MB.
1024MB	Set frame buffer size to 1024 MB.

Current UMA Size

Detect UMA size automatically.

- 35 - BIOS Setup

English