AMD GA-MA69VM-S2 user manual Press Y to load Bios defaults

c . Select the BIOS file and press ENTER.

Make sure again the BIOS file matches your motherboard model.

Step 2: The process of system reading the BIOS file from the floppy disk is displayed on the screen. When the message "Are you sure to update BIOS?" appears, press ENTER. The BIOS update will begin and the current process will be displayed.

1. Do not turn off or restart the system when the system is reading/updating the BIOS.

2. Do not remove the floppy disk or hard drive/USB drive when the system is updating the BIOS.

Step 3: When the update process is complete, press any key to return to the Q-Flash main menu.

Q-Flash Utility v2.02

Flash Type/Size		.................................Winbond 25X40	512K
		Keep DMI Data Enable
		!! CopyU dateBIOSBIOScompletedfrom Drive- Pass !!
		Save BIOS to Drive
Enter	: Run	PleaseKL:Movepress anyESC:Resetkey to continue F10:Power		Off

Step 4: Press ESC and then ENTER to exit Q-Flash and the system will restart. As the system reboots, you will see the new BIOS version during POST.

Step 5: As the system reboots, press DELETE to enter BIOS Setup. Select Load Optimized De- faults and press ENTER to load BIOS defaults. System will re-detect all peripherals devices after BIOS update, so we recommend that you reload BIOS defaults.

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software

`	Standard CMOS Features	Load Fail-Safe Defaults
`	Advanced BIOS Features	Load Optimized Defaults
`	Integrated Peripherals	Set Supervisor Password
`	Power Management Setup	Set User Password
`	PnP/PCI Configurations	Load Optimized DefaultsSave(Y/N)?& ExitY Setup
`	PC Health Status	Exit Without Saving

Esc: Quit	KLJI: Select Item
F8: Q-Flash	F10: Save & Exit Setup
	Load Optimized Defaults
	Press Y to load BIOS defaults

Step 6: Select Save & Exit Setup and then press Y to save settings to CMOS and exit BIOS Setup. When the system restarts, the whole update process is complete.

English

- 55 - Appendix