
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 15 below will appear. Use the ARROW keys to select ATI AHCI Compatible RAID
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen.
ATI AHCI Compatible RAID
ATI AHCI Compatible RAID
ENTER=Select F3=Exit
Figure 15
Windows Setup
Setup will load support for the following mass storage device(s):
ATI AHCI Compatible RAID
*To specify additional SCSI adapters,
*If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device ENTER=Continue F3=Exit
Figure 16
If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SATA driver again from the motherboard driver CD.
English
- 67 - | Appendix |