BASIC OPERATIONS (CONT.)
1) You may press the IN BUTTON (26) on the fly (while the disc is playing). This
will set a CUE Point without music interruption. Pressing the CUE BUTTON
(20) will now return you to the same point that you pressed the IN BUTTON
(26). You may now store this CUE Point in any of the BANK BUTTONS 1-4
(12).
2) You may also use the JOG WHEEL (13) to set a cue point. While a disc is
in PAUSE or CUE mode, use the JOG WHEEL (13) to scroll through a track
to find your desired starting point. Once you have found your desired posi-
tion press the PLAY BUTTON (17) to set your cue point. Pressing the CUE
BUTTON (20) or the IN BUTTON (26) will now return you to this exact point.
Figure 15
Figure 14
©American Audio® - www.AmericanAudio.us - CDI-500™ Instruction Manual Page 17
Figure 13

8. SCANNING (FAST FORWARD / FAST REVERSE)

This function gives you a fast search through a disc or track. Turn the SEARCH
KNOB (13) in clockwise direction for fast forward or turn the wheel counterclock-
wise for fast reverse. You can scan in four different forward and four different
reverse speeds depending on how much you rotate the knob.

9. SETTING and STORING a CUE POINT:

Setting A Cue Point:

A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON
(17) is pressed. You may set your cue points anywhere on a disc or in a track. You
may set up to five independent cue points per disc. Four cue points are stored
in the BANK BUTTONS 1-4 (12) and one is shared by the IN BUTTON (26) and
the CUE BUTTON (20). There are two (2) ways to set and create a CUE point as
detailed in figures 14 and 15.