)2
FAULT DIAGNOSIS
1.IGNITION : Position 1
2.Temperature selector wheel : "LO"
3.Within 20 seconds press the REST and DEFROST buttons simultaneously for more than 5 seconds.
4.The LED in the RECIRCULATE button flashes and "dI A" appears on the display.
5.Press the AUTO button until all DTC's are displayed and recorded.
6.The current faults are displayed first, then the intermittent faults. "END'" is displayed when all codes have been displayed.
7.To erase codes press v and ^ simultaneously for more than 5 seconds. The display will then show
8.IGNITION : OFF to end the test program.
| FAULT CODES - 202 Chassis from 9/95 |
|
|
DTC Readout | Description |
|
|
026 | CAN Bus Communication |
|
|
226 | |
|
|
227 | Outside Air Temperature Sensor (B14) |
|
|
228 | Heater Core Temperature Sensor (B10/1) |
|
|
230 | Evaporator Temperature Sensor (B10/6) |
|
|
231 | Engine Coolant Temperature Sensor (B11/4) |
|
|
232 | Refrigerant Pressure Sensor (B12) |
|
|
233 | Refrigerant Temperature Sensor (B12/1) |
|
|
241 | Refrigerant Level |
|
|
416 | Coolant Circulation Pump (A31m1) |
|
|
417 | Left Duovalve (Water Valve) (Y21y1) |
|
|
418 | Right Duovalve (Water Valve) (Y21y2) |
|
|
419 | A/C Compressor Electromagnetic Clutch (A9k1) |
|
|
420 | Closed (Idle) Throttle Speed Increase |
|
|
421 | Pulse Module (N65) |
|
|
422 | Serial Interface Connection (K1) to Instrument Cluster (IC) |
|
|
451 | Diverter Flap (Y11/3) |
|
|
452 | Blend Air Flap (Y11/3) |
|
|
453 | Fresh/Recirculated Air Flap (Y11/3) Long Stroke |
|
|
454 | Fresh/Recirculated Air Flap (Y11/3) Short Stroke |
|
|
455 | Defroster Outlet Flap (Y11/3) Long Stroke |
|
|
456 | Defroster Outlet Flap (Y11/3) Short Stroke |
|
|
457 | Footwell Flap (Y11/3) Long Stroke |
|
|
458 | Footwell Flap (Y11/3) Short Stroke |
|
|
459 | Serial Interface Connection (K2) to Instrument Cluster (IC) |
|
|
108
