62
If one of the following messages appears when the JOG dial
button is pressed, the card will not be formatted.
5Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit’s current statuses appears at the
top and bottom of the viewfinder screen.
Error message Remedial action
CONFIG NG
NO CARD
(setup card has not been
inserted)
Insert the card.
CONFIG NG
ERROR
(the card cannot be formatted)
The card may be defective.
Replace it.
The operations for saving setting data on the setup
card and loading the saved data from the card are
performed on the CAM CARD READ/WRITE screen
of CAM MAIN MENU 3.

Formatting the setup card

Setup card operations
1Perform the menu operations (pages 72 to 74),
and display the “CAM CARD READ/WRITE”
screen.
4To proceed with the formatting of the setup card,
turn the JOG dial button to move the arrow (cursor)
to YES, and press the JOG dial button. When the
formatting of the card is completed, the following
message appears.
<Note>
When the card is formatted, the settings statuses
applying at the time are also saved in the memory.
3When the JOG dial button is pressed, the following
message appears on the screen.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG OK
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG ?
YES
nNO
2Turn the JOG dial button to move the arrow
(cursor) to the CARD CONFIG item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
nCARD CONFIG
READ USER DATA
TITLE :