9
Power supply section
1Battery mount
This is for attaching the Anton/Bauer battery pack.
2DC IN (external power input) socket (XLR, 4P)
When operating this unit using an AC power
source, this socket is connected to the model AJ-
B75 AC adapter (optional accessory).
3BREAKER button
To protect the equipment, the circuit breaker is
tripped when an overcurrent flows inside the unit,
and the power is automatically turned off. Push this
button to the pushed-in position after performing
internal inspections and adjustments. If there is no
problem, the power will be turned back on.
4POWER switch
ON
:Set here to turn on the power.
OFF
:Set here to turn off the power.
Parts and their functions
4
1
2
3
Accessory mounting section
1Hooks for attaching shoulder strap
Attach the ends of the accessory shoulder strap to
these hooks.
2Light shoe
Use this to attach the video light, etc.
3Lens mount (Bayonet type)
Use this to attach the lens.
4Lever for securing lens
Insert the lens into the lens mount 3, and turn the
lens mount ring using this lever to secure the lens.
5Lens mount cap
To remove the cap, push the lever for securing the
lens 4up.
Keep the cap in place while the lens is not
attached.
6Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or
microphone cable.
7Tripod mount
Mount the tripod attachment (SHAN-TM700),
available as an optional accessory, when the unit is
to be anchored to the tripod.
8LENS terminal (12-pin)
The connecting cable of the lens is connected here.
For details concerning the lenses that can be used,
consult your dealer.
9Shoulder pad
This pad can be adjusted to facilitate operation
when the unit is operated on the user’s shoulder.
The pad position can be moved forward or
backward when the two securing screws are
loosened.
21
1
9
6
6
3
4
7
8
5