97
Setting menu screens (VTR MAIN MENU)
FUNCTION screen

The VTR’s functions are set on this screen.

Item Variable
range Remarks
NEWS REC
MODE OFF
0.2
:
2.0
VF
display
USER
ENG For selecting the VTR
START button
acknowledgment time
during recording.
OFF
:
The pressing of the VTR
START button is
acknowledged
immediately, recording is
stopped, and the unit is set
to the REC PAUSE mode.
0.2—2.0
:
The pressing of the VTR
START button is not
acknowledged and
recording is continued for
the time set (in increments
of 0.2 sec.).
Item Variable
range Remarks
HD SDI OUT ON
SIDE SW
AUTO
OFF
VF
display
USER
ENG
For controlling the output
signals of the HD SDI OUT
connector.
However, ON or OFF
cannot be selected for
these signals during
recording: the status prior to
the start of the recording is
maintained.
ON
:
The signals are forcibly
output. However, the
signals are output in the
EE/PB mode when the
MONITOR OUT SDI
switch on the side panel is
set to OFF.
SIDE SW
:
The signals are not output
when the MONITOR OUT
SDI switch on the side
panel is set to OFF.
AUTO
:
The signals are output
when the connector has
been connected to the
output connector.
However, the signals are
output in the EE/PB mode
when the MONITOR OUT
SDI switch on the side
panel is set to OFF.
OFF
:
The output is stopped.
HUMID OPE ON
OFF
USER
ENG For selecting the VTR
operation when
condensation has formed.
ON
:Operation is
continued as usual.
OFF
:Operation of all
controls except the
POWER switch and
EJECT button is
inhibited.
REC START ALL
NORMAL
USER
ENG
For selecting
acknowledgement of recording
started by the VTR START
button.
ALL:
The start of the recording is
acknowledged regardless of
the VTR mode.
NORMAL:
The start of the recording is
acknowledged only in the
STOP (POWER SAVE) mode
and REC PAUSE mode.
PAUSE TIMER 10
20
30
60
USER
ENG
For selecting the amount of
time REC PAUSE is to be held.
10/20/30/60
:10, 20, 30 or 60
minutes.
RETAKE MODE ON
OFF
USER
ENG Functions for rewinding
the tape to the position
where recording started.
ON
:The RETAKE
function works.
OFF
:The RETAKE
function does not
work.
<Note>
The RETAKE function is
set OFF when the unit’s
power switch has been set
to ON.
INTERVAL REC
MODE ON
OFF
USER
ENG For selecting the
intermittent recording
mode.
ON
:
Intermittent recording is
performed.
OFF
:
Intermittent recording is
not performed.
<Note>
Intermittent recording is
set OFF when the unit’s
power switch has been set
to ON.
INTERVAL REC
TIME 00s10f
:
59s29f
USER
ENG
For setting the REC time for
intermittent recording.
<Note>
When REC time is set at
less than 1 second, the
initial recording time will
be 1 second.
INTERVAL
PAUSE TIME
00h00m02s
:
23h59m59s
USER
ENG For setting the REC
PAUSE time for
intermittent recording.
The underlining in the variable range column indicates the setting in the preset mode.