34
Audio input preparation
1Attach the WX-RJ700 wireless receiver to the WX-
ZJ770 camera attachment.
2Align the grooves in the camera attachment with
the pins on the battery case, etc. to attach the
wireless receiver.
3Connect the AUDIO IN connectors on the camera
with the wireless receiver using the XLR cable.
4Set the AUDIO IN switch or switches for the
channel or channels to which the XLR cable has
been connected to “REAR.”
5Set the LINE/MIC/+48V selector switch on the rear
panel to “MIC.”
3Set the LINE/MIC/+48V selector switch on the rear
panel to “LINE.”
When detaching the wireless receiver, push up
the lever on the bottom panel of the camera
attachment to disengage it.
<Note>
For details on the operations and other aspects of the
WX-RJ700 wireless receiver, refer to the operating
instructions which accompany the receiver.
Attach the WX-RJ700 wireless receiver when
Panasonic’s wireless system is to be used.

When using a wireless microphone

WX-RJ700 wireless
receiver
WX-ZJ770 camera
attachment
Audio output connectors
AUDIO IN connectors
AUDIO IN switches
XLR cable
1Connect the AUDIO IN connectors on the camera
with the audio component using the XLR cable.
2Set the AUDIO IN switch or switches for the
channel or channels to which the microphone or
microphones have been connected to “REAR.”

When connecting audio components

AUDIO IN connectors
AUDIO IN switches
LINE/MIC/+48V
selector switch