64
If one of the following messages appears when the JOG dial
button is pressed, the data cannot be saved.
12Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit’s current statuses appears at
the top and bottom of the viewfinder screen.
Error message Remedial action
WRITE NG
NO CARD
(setup card has not been
inserted)
Insert the card.
WRITE NG
FORMAT ERROR
(formatting error)
The card was formatted by a
device other than the unit.
Replace the card.
WRITE NG
ERROR
(the data cannot be saved)
The card may be defective.
Replace it.
11Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
When the data saving is completed, the
following message appears.
To save the VTR unit’s data, open the VTR CARD
READ/WRITE screen, and perform steps 9to 11.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE OK
YES
nNO
TITLE :
10When the JOG dial button is pressed, the
following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
nNO
TITLE :
9Turn the JOG dial button to move the arrow
(cursor) to the WRITE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
nWRITE
CARD CONFIG
READ USER DATA
TITLE :
Give a title to the selected file.
Setup card operations