100
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
Setting menu screens (VTR MAIN MENU)
The underlining in the variable range column indicates the setting in the preset mode.
Item Variable
range Remarks
VF
display
SAVE LED
SAVE&TAPE
SAVE
USER
ENG For setting the operation
of the SAVE lamp.
SAVE
:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE
:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
When the tape is
approaching its end, it
flashes in tandem with
the warning alarm that
sounds when tape-end is
approaching.
VTR VF INDICATOR screen

The information to be displayed in the viewfinder is set

on this screen.
Item Variable
range Remarks
TAPE (IND) ON
OFF
VF
display
USER
ENG For switching the
remaining tape display to
ON or OFF.
BATTERY (IND) ON
OFF
USER
ENG For switching the battery
voltage display to ON or
OFF.
LEVEL METER
(IND) CH1
CH1•CH2
OFF
USER
ENG For selecting what the
audio level meter is to
display.
CH1
:
The level of the CH1
signals only is displayed.
CH1•CH2
:
The levels of both the
CH1 and CH2 signals
are displayed.
OFF
:No display.
AUDIO IN (IND) ON
OFF
USER
ENG For switching the audio
input display to ON or
OFF.
ON
:The audio input is
displayed.
OFF
:The audio input is
not displayed.
TC (IND) ON
OFF
USER
ENG For switching the time
code display to ON or
OFF.
ON
:The time code is
displayed.
OFF
:The time code is not
displayed.
VTR WARNING
(IND) ALWAYS
NORMAL
OFF
USER
ENG For setting when the
VTR’s warnings are to be
displayed.
ALWAYS
:
The warning display
always appears when a
warning has occurred.
NORMAL
:
The display appears for
3 seconds after the
warning occurred and for
3 seconds after
recording was started or
completed.
OFF
:
The warning displays do
not appear.
MIC/AUDIO screen

The MIC/AUDIO settings are performed on this

screen.
Item Variable
range Remarks
FRONT MIC
POWER ON
OFF
VF
display
USER
ENG
ON
:The phantom power
is supplied to the
front microphone.
OFF
:The phantom power
is not supplied to the
front microphone.
MIC LOWCUT
CH1 FRONT
REAR
F&R
OFF
USER
ENG For setting the high-pass
filter for the CH1 mic input.
FRONT
:The high-pass filter
for the front mic
input is set to ON.
REAR
:The high-pass filter
for the rear mic
input is set to ON.
F&R
:The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
:The high-pass filter
for the CH1 input
is set to OFF.