56

Adjusting the audio level

When the AUTO SELECT CH1 and CH2 selector
switches are set to AUTO, the audio CH1 and CH2
input levels are adjusted automatically.
Proceed as follows to adjust the audio channel 1 and
2 levels manually.

Manual audio level adjustments

When the audio levels have been adjusted manually,
the limiter circuit is tripped by an excessively high
input level. This circuit can be turned ON or OFF on
the MIC/AUDIO screen of the VTR menu.
(The factory setting is OFF.)

Limiter

1Set the AUTO SELECT CH1 and CH2 selector
switches to MAN.
AUTO SELECT CH1
selector switch
AUTO SELECT CH2
selector switch
AUDIO LEVEL
CH1 control
AUDIO LEVEL
CH2 control
2Adjust the AUDIO LEVEL CH1 and CH2 controls in
such a way that, when audio signals are input, the
level meter reading will not exceed 0 dBu even
under maximum signal input level conditions.