Panasonic AJ-HDC27V, AJ- P 2, 7, 3, 5, 6, 8

63
Saving the data settings on the
card
Select the file No.
Give a title to the selected file.
Setup card operations
1Perform the menu operations (pages 72 to 74),
and display the “CAM CARD READ/WRITE”
screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
4Turn the JOG dial button to move the arrow
(cursor) to the TITLE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
m
TITLE :
2Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes after
WRITE, and press the JOG dial button.
3Turn the JOG dial button to select a number from 1
to 8, and press the JOG dial button.
5When the JOG dial button is pressed, the arrow
(cursor) starts flashing, and the input mode is
established.
6Turn the JOG dial button until the character to be
set appears. When the button is turned, the
character displayed is switched in the following
sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ’, >, <, /, –
8Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps 5to 7to set the characters (maximum of 8).
7Press the JOG dial button to enter the character.
< CAM CARD READ/WRITE >
SELECT :1
READ
nSELECT :1
WRITE
CARD CONFIG
READ USER DATA
TITLE :
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
m
TITLE :