Mercedes-Benz manual Using the CS1000 Code Scanner

Mercedes Benz Code Scanner CS1000 OB15-11

SECTION 1 Using the CS1000 Code Scanner

Diagnostic Cable

￿General Usage Notes

The OB15 Code Scanner can display available fault codes from Mercedes Benz vehicles fitted with 8-pole, 16-pole and 38-pole Diagnostic Connectors. The Red wire from the scanner is for powering up the unit and is taken either from the power source socket on the Diagnostic Connector, if available, or from the vehicle battery, using the extension cable supplied. The Black earth wire from the scanner is grounded to the earth socket on the Diagnostic Connector. The Yellow wire from the scanner is used to read the codes from the

￿Diagnostic Connector.

The P/N 15-C2 diagnostic cable must be used with the P/N 15-C2-1 diagnostic cable for the 38-pole vehicle diagnostic connector.

9