Mercedes-Benz CS1000 manual Analog Codes, Models, Model Years, Connect wires of Scanner as follows

￿￿!'￿￿￿￿￿￿￿￿&￿￿￿￿￿￿￿
1	ANALOG CODES			CS1000 Code Scanner OB15-11
Models			Model Years
140.057 140.076			1992-1995
Connect wires of Scanner as follows
Scanner		Data Link Connector 38-pin
Yellow		Socket	19
Black		Socket	1
Red		Socket 3
FAULT CODE TABLE
DTC Readout			Possible Cause of Failure
1			No fault found
2			Right oxygen sensor faulty
3			Lambda control of right LH-SFI control module faulty
4			Air injection at right cylinder bank faulty
5			Exhaust gas recirculation of right LH-SFI control module faulty
6			Idle speed control faulty
7			Ignition system for right cylinder faulty
8			Right engine coolant temperature sensor, circuit open or circuit short
9			Right intake air temperature sensor, circuit open or circuit short
10			Voltage at mass air sensor too high/low
11			Tn-signal (rpm signal ) at right LH-SFI control module faulty
12			Oxygen sensor heater of right oxygen sensor, circuit open or circuit short
13			Camshaft position sensor signal of right ignition control module faulty
14			Intake manifold pressure at startup (in right ignition control module) too low or too
			high
15			Wide open throttle position information faulty
16			Closed throttle position information faulty
17			Data exchange fault between right-hand control modules LH-SFI ignition control
			module electronic accelerator
18			Right adjustable camshaft timing solenoid circuit open or circuit short

37