Mercedes-Benz CS1000 manual System Selection

Mercedes Benz Code Scanner CS1000 OB15-11

3. System Selection

1

2

3

4

5

6

7

8

9

10

11

12

All analog impulse fault code systems. If unsure, start with this system.

Digital type SRS (1 or 2 airbag) system as follows:

1.W202 © class). 2. W129 / W140 1993 - 1996

Digital type SRS (4 airbags)

1.W210 (E class). 2. W129 / W140 1996 1998

Digital type LH-SFI for the Current fault codes. 1991-1993

Digital type LH-SFI for the Stored fault codes. 1991-1993

Digital type HFM-SFI for the Current fault codes. 1993-1997

Digital type PMS for the Current fault codes. 1993-1996 Digital type HFM-SFI for the Stored fault codes. 1993-1997

Digital type PMS for the Stored fault codes. 1993-1996

Digital type DM for the Current fault codes. 1991-1996

Digital type DM for the Stored fault codes. 1991-1996

Digital type DM for the Registered fault codes. 1991-1996

Digital type ME-SFI for the Current fault codes. 1996-1998

Digital type ME-SFI for the Stored fault codes. 1996-1998

Press the SYSTEM key to scroll to display from ￿1 to ￿2 system etc....

SYSTEM

ANALOG TEST PROCEDURES

1.Ignition in the KOEO position (Key On Engine Off)

2. Choose system 1

3.Place test probe (yellow) in pin-out for specific analog test.

DIGITAL TEST PROCEDURE

1.Ignition in the KOEO position (Key On Engine Off)

2.Choose system ￿2 thru ￿12

3.Place test probe (yellow) in pin-out for specific analog test.

4.If any system does not respond, test it using the Analog Test Procedure.

*Some early LH Injection and Diagnostic Module systems may not respond to the digital test.

15