BASIC OPERATIONS (CONT.)
11.PITCH BEND:
This function will momentarily increase or decrease a tracks playback speed. There are two ways to operate this function with the (-) & (+) PITCH BUTTONS (25) or with the JOG WHEEL (14). The maximum pitch bend percentage allowed is +/- 16%. The pitch bend function will work in conjunction with the PITCH SLIDER
(21)pitch setting. The PITCH SLIDER (21) adjustment can be changed to range from +/-8%, +/-12%, or +/-16% (See changing "PITCH SLIDER PERCENTAGE RANGE" on page 16). For example, if the PITCH SLIDER (21) is set to a 2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of -/+16%.
PITCH BEND BUTTONS (25):
The (+) PITCH BEND BUTTON (25) will provide a speed bump and the (-) PITCH BEND BUTTON (25) will provide a slow down. The extent to which the speed changes is proportionate to the amount of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (25) is held down continuously, the disc speed will increases and will continue to increase until reaches a maximum of 100% speed gain. When you release the
(+)PITCH BEND BUTTON (25) the disc speed will automatically return to it’s previous speed.
Holding down or tapping on the
(+) PITCH BEND BUTTON (25) will provide a speed bump in the playback pitch.
| | Holding down or tapping on the |
| | (-) PITCH BEND BUTTON (25) |
| Figure 15 | will provide a slow down in the |
| playback pitch. |
| |
Figure 16
JOG WHEEL (14):
The JOG WHEEL (14) will temporarily bend the pitch if a track is in play mode Rotating the wheel in a clockwise direction will increase your track pitch and rotating the wheel in a counter-clockwise direction will slow your track pitch. The speed you rotate the JOG WHEEL (14) will determine pitch bend percentage (%).
Figure 17
©American Audio® - www.americandj.com - PRO-DJ2FX™ Instruction Manual Page 17
