GENERAL FUNCTIONS AND CONTROLS (Cont.)
control when the CD is in pause or cue modes allowing you to set a cue point.
B.The inner wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch percentage up to 16%, and turning the wheel in the counterclockwise direction will decrease the pitch percentage up to
8.SHUTTLE WHEEL - (OUTER RING) This wheel has two (2) forward and two (2) reverse speed posi- tions for speed searching through tracks. The more you turn the wheel in either direction, the faster you search.
9.PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to change from play to pause or from pause to play. While in play mode the Green Backlit LED will glow, and while in pause mode the Green Backlit LED will flash.
10.CUE - Pressing the CUE button during play pro- vides a return to the position at which play was started. If a new cue point is set during playback, pressing the CUE BUTTON will return to you to the new cue point (see setting a CUE POINT, page 13). The backlit red CUE LED will flash twice every time a new CUE POINT has been set. The red CUE LED will also glow when the player is in CUE MODE indicating the player is in the ready condi- tion. The CUE button can be held down to momen- tarily play the CD. When you release the CUE but- ton it instantly returns to the CUE POINT. You can also tap the CUE button to create a BOP EFFECT (for definition of BOP EFFECT, see page 5).
11.
TRACK BUTTON - This buttons is used to select your desired track. Tapping this button will back skip on track, holding down this button will rapidly BACK SKIP through the tracks on your CD.
12.IN REAL TIME CUE BUTTON (IN/R. CUE)- “CUE “ON THE FLY” - This function allows you to set a CUE POINT (see CUE POINT page 11) with- out interruption of music (“on the fly”). This button also sets the beginning of a seamless loop (see
SEAMLESS LOOP).
13.(+) PITCH BEND Button - The (+) pitch bend function creates a momentary “BUMP” in the CD’s BPM’s (Beats per minute) while it is playing. This will allow you to match the beats between two playing CD’s or any other music source. Remember, this is a momentary func- tion. When you remove your finger from this but- ton, the BPM’s will automatically return to PITCH SLIDERS (18) selected pitch. Holding down this button will give a maximum of +16% pitch.
14.OUT/EXIT - Used to set the ending point of a loop. When starting a loop by pressing the IN/R. CUE (12), pressing the OUT/EXIT button will play the loop continuously. To exit the loop, press the OUT/EXIT button again.
15.TRACK BUTTON - This buttons is used to select your desired track. Tapping this button will forward skip to the next track, holding down this button will rapidly forward skip through the tracks on your CD.
16.RELOOP BUTTON - If a SEAMLESS LOOP has been made (see setting a SEAM- LESS LOOP on page 11), but the CD Player is not actively in SEAMLESS LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly reactivate the SEAMLESS LOOP mode. To exit loop, press the OUT/EXIT BUT- TON (14). LOOP and RELOOP will appear in the LCD DISPLAY (21) when the RELOOP function is available.
17.BOP - This function will instantly play the last set cue point during playback without inter- ruption of music. Use this function to create a stutter effect.
18.PITCH SLIDER - This slider is used to adjust the pitch percentage of disk loaded in the unit. Use this slider to match the BPM’s of this unit to that of another music source. As where the
American DJ® AUDIO •PRO DJ3™ INSTRUCTION MANUAL • PAGE 7
