American Audio SDJ-1 7. FRAME SEARCH, 8. SETTING a CUE POINT: Setting A Cue Point:

BASIC OPErATIONS (CONT.)

©American Audio® - www.americanaudio.us - SDJ-1™ Instruction Manual Page 16

7. FRAME SEARCH

This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue or

loop point. To use the scroll function you must first be in Pause Mode (see section 4) or Cue Mode (see section

8). Once you are in Pause or Cue mode, press the Search ButtonS (17) to scroll through the track (Figure

9). When you use the Search ButtonS (17) the monitor (headphone level) function allows you to here what

you are scrolling through. Once you reach your desired starting point you can set a cue (starting) point by

pressing the play/pauSe Button (18) as in Figure 7. Pressing the cue Button (19) as in Figure 8 will now

return you to the point you just set.

Figure 9

A cue point is the exact point playback will begin when the play/pauSe Button (18) is pressed. You may set

your cue point anywhere on a track. There are two ways to set and create a CUE point as detailed in figures

10 and 11.

1) You may press the in Button (12) on the fly

(while the track is playing). This will set a CUE

Point without music interruption. Pressing the

cue Button (19) will now return you to the

same point that you pressed the cue But-

ton (19). Pressing the cue Button (19) will

now return you to this exact point. Figure 10

2) You may also use the jog Wheel (20) to set

a cue point. While a track is in PAUSE or

CUE mode, press the Search Button (1)

and use the jog Wheel (20) to scroll

through a track to find your desired starting

point. Once you have found your desired po-

sition press the play/pauSe Button (18)

to set your cue point. Pressing the cue

Button (19) will now return you to this ex-

act point.

Figure 11