American Audio XDM343 Replacing the Crossfader, Phono, Line, Output, Frequency range, Distortion

(28)MIC 2 JACK - Connect your microphone with 1/4 inch (6.3mm) jack plug here. The signals can be controlled via CHANNEL 2, if the PHONO / LINE / MIC switch (5) is set to MIC 2.

(29)LINE 3 - PHONO 3 SELECTOR - Used to switch the CH-3 input jacks to line 3 or phono 3.

Replacing the Crossfader

Instructions for replacing the crossfader:

•Disconnect from main power supply

•Remove the fader knob.

•Remove the two outer screws.

•Take the fader out and unplug the connection cable.

•Connect the new fader and replace back into mixer.

Technical Specifications - model XDM-343

Inputs:
Microphone	1.5mV, 600 Ohm
Phono	1.2mV, 47kOhm
Line	100mV, 27kOhm
Output	20V, peak to peak
Frequency range	20Hz-20KHz, ± 1dB
Distortion	<0,03%
S/N-ratio	>85dB
Talkover	-15dB
Tone control	Treble: 10Khz ± 12dB
	Middle: 1 KHz ± 12dB
	Bass: 100 Hz ± 12dB
Headphone impedance	16 Ohms
Power supply	AC115/230V, 50/60Hz
Dimensions	12.5” W x 10.25” D x 4” H
	262 x 320 x 102 mm
Weight	8 lbs. / 3.5 kg

© American DJ® AUDIO Los Angeles, CA 90058 USA

Specifications subject to change without notice. XDM-343 User Instructions page 5