American DJ user service Fixture Cleaning, Color 150/RG Cleaning, Color 150/RG Trouble Shooting

Color 150/RG™ Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.

1.Use normal glass cleaner and a soft cloth to wipe down the outside casing.

2.Use a brush to wipe down the cooling vents and fan grill.

3.Clean the external lens with glass cleaner and a soft cloth every 20 days.

4.Clean the internal lens with glass cleaner and a soft cloth every 30-60 days.

5.Always be sure to dry all parts completely before plugging the unit back in.

Color 150/RG™ Trouble Shooting

Trouble Shooting:

Listed below are a few common problems that you may encounter, with solutions.

No light output from the unit;

1.Be sure you have connected your unit into a standard 120V wall outlet.

2.Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.

3.Remove the lamp cover and be sure the lamp is seated in its socket properly. Occasionally lamps become loose during shipping be sure the lamp is push in to its socket all the way.

4.Be sure the fuse holder is completely and properly seated.

Unit does not respond to sound;

Color 150/RG™ DMX Traits

This chart below details the DMX traits of the fixture. The individual trait can only be accessed an universal DMX controller. Note: The Color 150/RG™ has a special DMX function

				DMX CHANNEL
	1			2			3
	DIMMER			COLOR			GOBO
	255	100%		CLR SCROLL FST	213-255
				CLR SCROLL MED	181-212
				CLR SCROLL SLW	170-180	255	255
				PURPLE	149-169		ROTATING GOBO 2
	128		50%	PINK	128-148	128	171
				ORANGE	107-127		170
							S P O T
				YELLOW	86-106		86
				GREEN	65-85		85
							ROTATING GOBO 1
				BLUE	44-64
						0	00
				RED	23-43
	0	0%		WHITE	01-22
Color 150/RG™					Master/Slave Settings

This chart details the Master/Slave dip switch setting for Master/Slave configuration for four units. Use these dip switch setting when you will be using two or more fixtures in a Master/Slave configuration. The “Master - Head 1” settings should only be used once.

ON ON

1.Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit.

2.Be sure the SENSITIVITY KNOB (3) is not set to the maximum position.

3.Be sure the dip-switches are set for Stand-Alone mode.

1 2 3 4 5 6 7 8 9 10

Master - Head 1

ON

1 2 3 4 5 6 7 8 9 10

Head 3

1 2 3 4 5 6 7 8 9 10

Head 2

ON

1 2 3 4 5 6 7 8 9 10

Head 4

©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 15 ©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 16