Figure 5

Color 150/RG™

Set Up

 

 

To achieve a DMX address of 21, combine dip switches 1, 3, and 5. Sense dip switch 1 has a value of 1, dip switch 3 has a value of 4, and dip switch 5 has a value of 16, the combination of the create a DMX value of 21.

Set DMX address 21:

Set DMX address 201:

Dip-switches # 1 = 1

Dip-switches #

1 = 1

3

= 4

4

= 8

5

= 16

7

= 64

 

= 21

8

= 128

 

 

 

= 201

Data Cable Requirements (For DMX and Master/Slave Opera- tion): The Color 150/RG™ can be controlled via DMX-512 protocol. The DMX address is set using the dip-switches on the rear panel of the Color 150/RG™. Your unit excepts 3-pin XLR connector for data input and data output (Figure 5). When using a DMX controller with 5-Pin XLR output jacks or when linking from a DMX fixture with 5-Pin XLR jack to the Color 150/RG™, be sure to follow

the pin conversion chart on page 12. If you are making your own cables, be sure to use standard two conductor shielded cable (This cable may be purchased at almost all pro sound and lighting stores). Your cables should be made with a male and female XLR connector on either end of the cable. Also remember that DMX cable must be daisy chained and can not be split.

Notice: Be sure to follow figures 6 and 7 when making your own cables. Do not use the ground lug on the XLR connector. Do not con- nect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.

XLR Male Socket

XLR Female Socket

XLR Pin Configuration

1 Ground

2 Cold

2 Cold

1 Ground

Pin 1 = Ground

 

 

 

 

 

 

 

 

 

Pin 2 = Data Compliment (negative)

 

3 Hot

 

3 Hot

Pin 3 = Data True (positive)

 

 

 

 

Figure 6

©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 11

Color 150/RG™

 

 

 

Set Up

 

 

COMMON

 

 

DMX512 OUT

1

DMX +

1

DMX512 IN

3

3

 

3-PIN XLR

2

DMX -

2

3-PIN XLR

Figure 7

Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 90-120 ohm 1/4 watt resistor which is con- nected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number ZDMX/T) will decrease the possibilities of erratic behavior.

 

Termination reduces signal errors and

1

avoids signal transmission problems

3

and interference. It is always advisable

2

to connect a DMX terminal, (Resistance

 

120 Ohm 1/4 W) between PIN 2 (DMX-)

 

and PIN 3 (DMX +) of the last fixture. Figure 8

5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversion.

3-Pin XLR to 5-Pin XLR Conversion

Conductor

3-Pin XLR Female (Out)

5-Pin XLR Male (In)

 

 

 

Ground/Shield

Pin 1

Pin 1

 

 

 

Data Compliment (- signal)

Pin 2

Pin 2

 

 

 

Data True (+ signal)

Pin 3

Pin 3

 

 

 

 

Not Used

 

Do Not Use

 

 

 

 

Not Used

 

Do Not Use

 

 

 

 

©American DJ Supply® - www.americandj.com - Color 150/RG™ Instruction Manual Page 12

Page 6
Image 6
American DJ 150/RG user service Pin XLR to 5-Pin XLR Conversion

150/RG specifications

The American DJ 150/RG is a powerful and versatile lighting fixture that has become a staple for DJs, event planners, and venues seeking to elevate their lighting setup. This dynamic light offers an array of features and technologies designed to enhance performances and create unforgettable atmospheres.

One of the standout features of the American DJ 150/RG is its RGB color mixing capability. Utilizing a combination of red, green, and blue LEDs, the fixture can produce a wide spectrum of colors, allowing users to create vibrant and engaging lighting displays. This feature is particularly beneficial for creating mood lighting or for synchronizing colors with music during performances.

The 150/RG is equipped with advanced control options. It supports DMX512 protocol, allowing for precise control over multiple fixtures in a setup. This flexibility enables lighting designers to craft elaborate light shows that can match the rhythm and energy of the music being played. Users also have the option to operate the light in stand-alone mode, making it an excellent choice for smaller events where a full lighting rig may not be necessary.

In terms of construction, the American DJ 150/RG is designed with durability in mind. The fixture boasts a robust housing that can withstand the rigors of transportation and frequent use. Its compact size makes it easy to transport and set up, while still delivering professional-grade performance.

Another key characteristic of the 150/RG is its energy efficiency. With the use of LED technology, this fixture consumes significantly less power compared to traditional lighting sources. This feature not only saves on energy costs but also reduces the need for complex ventilation systems, as LEDs produce less heat.

The American DJ 150/RG also includes user-friendly controls. The fixture is equipped with an intuitive interface that allows for easy adjustments of colors, patterns, and effects. This user-centric design ensures that both novice and experienced users can quickly familiarize themselves with the light and make adjustments during their performances.

In summary, the American DJ 150/RG is an exceptional lighting fixture that combines versatility, durability, and energy efficiency. With its rich color mixing capabilities, advanced control options, and robust construction, it caters to the needs of DJs, event planners, and venues looking to create captivating and visually stunning experiences. Whether for a club, wedding, or live performance, the 150/RG stands out as a reliable choice for quality lighting solutions.