American Dryer Corp AD-115ES II ADE-115ES 60 Kw Electric Oven Reversing, 3ø Motor

ADE-115ES (60 Kw Electric Oven) Reversing, 3ø Motor

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. When fuses are used they must be dual element, time delay, current limiting, class RK1 or RK5 ONLY. Calculate/determine correct fuse value, by applying either local and/or National Electrical Codes to listed appliance amp draw data.

B.Circuit breakers are thermal-magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3-phase (3Ø) dryers must be 3-pole type.

OVEN SIZE	SERVICE		WIRE	APPROX.		MINIMUM	FUSING	CIRCUIT
		PHASE		AMP DRAW
(Kw)	VOLTAGE		SERVICE			WIRE SIZE		BREAKER
				60 Hz	50 Hz		Dual Element
							Time Delay
60	208	3ø	3	181	--	*	250	250
60	240	3ø	3	159	161	*	200	200
60	380	3ø	4**	--	100	*	125	125
60	400	3ø	4**	--	95	*	125	125
60	416	3ø	4**	--	92	*	125	125
60	460	3ø	3	83		*	125	125
60	480	3ø	3	80		*	100	100
60	575	3ø	3	66		*	100	100

*AWG Stranded Wire Type...size wire as per National Electrical Code or local codes. (Motor lead wire is recommended.)

**3-wire available.

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the left side panel behind top/access control door. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.

WARNING: 208 VAC AND 240 VAC ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.

IMPORTANT: 380, 400, and 416 Volt dryers are built 4-wire only. Customer must contact the factory to special order 3-wire systems.

26