IMPORTANT: If the door is opened during a cycle, both the heat and motor will stop. However, the microprocessor controller (computer) will continue to count the time, either upward or downward, depending on which parameter is programmed. Continuation of the cycle will resume only after the door has been closed and any other of the three (3) temperature selection buttons is again depressed.
c.Once the preprogrammed dryness level and cool down period has been reached or the maximum automatic time has expired, whichever comes first, the tone (buzzer) will sound for
NOTES: 1. If
2.If
4.
a.Turn power on to the dryer.
b.Insert coins, rotary meter type only.
c.Select temperature by using rocker switch and selecting “HI TEMP,” “LO TEMP,” or “PERM PRESS.”
d.Press “Push To Start” button to start the cycle.
e.Upon completion of the drying and cooling cycles the dryer will shut off.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. Continuation of the cycle will resume only after the door has been closed, and the “Push To Start” button is pressed.
OPL MODELS
1.To start the dryer:
a. Microprocessor Controller (Computer) Dryers...
1)The L.E.D. display will read “FILL.”
2)Press the “E” on the keyboard (touch pad).
3)The L.E.D. display will quickly show “Ld30,” “LC04,” and “F180.” The dryer will start, and the L.E.D. display will show “dr30.”
31