3)3-Phase (3ø) Wiring Connections/Hookup "REVERSING MODELS ONLY"

The electrical connections on ALL 3-phase (3ø) gas and steam dryers are made into the rear service box located at the upper left area of the dryer. Electrical connections for electrically heated dryers are made in the electric oven area located at the upper rear area of the dryer.

IMPORTANT: A separate circuit servicing each dryer must be provided.

If local codes permit, power to a gas or steam dryer can be made by the use of flexible U.L. listed power cord/pigtail (wire size must conform to rating of dryer), or the dryer can be hard wired directly to the service breaker panel. In ALL cases, a strain relief must be installed where the wiring enters the dryer.

The only electrical input connections to the dryer are the 3-phase (3ø) power leads (L1, L2, L3, and sometimes neutral) and ground. Single-phase (1ø) power for the control circuit is done internally to the dryer. No single-phase (1ø) input connection is required on a 3-phase (3ø) dryer.

For gas and steam dryers manufactured for operation at 3-phase (3ø), the electrical connections are made at the power distribution block located in the service box at the rear, upper left corner of the dryer. The ground connection is made to the copper lug also provided in this box. To gain access to the service box contactor, the service box cover must be removed.

23

Page 26 Page 28
Page 27
Image 27
American Dryer Corp ML-55HS installation manual
Page 26 Page 28

ML-55HS specifications

The American Dryer Corp ML-55HS is a high-performance hand dryer that offers efficient and effective drying solutions for commercial and public restrooms. Known for its innovative design and advanced technology, the ML-55HS is a popular choice among facility managers looking for a reliable and eco-friendly drying option.

One of the key features of the ML-55HS is its powerful motor. With a speed of up to 28,000 RPM, this hand dryer can dry hands in as little as 10 to 15 seconds, significantly reducing wait times in busy facilities. This high speed also helps to minimize energy consumption, making the dryer not only time-efficient but also cost-effective.

The dryer is equipped with a built-in HEPA filter that captures 99.97% of airborne particles down to 0.3 microns. This means that users can enjoy not only the convenience of a fast-drying hand-drying solution but also a hygienic one, preventing the spread of germs and bacteria in shared spaces. The HEPA filter is easy to replace, ensuring ongoing efficiency and cleanliness.

Another notable aspect of the ML-55HS is its adjustable speed and heat settings. This versatility allows users to customize their drying experience based on their preferences, ensuring optimal comfort for everyone—regardless of the season or environment. Such adaptability also helps to further conserve energy.

The design of the ML-55HS is both sleek and durable, made from high-quality materials that can withstand the rigors of daily use in high-traffic areas. Its vandal-resistant features, including a tamper-proof cover and concealed screws, ensure that the dryer maintains its integrity even in challenging environments.

Moreover, the ML-55HS operates quietly, making it suitable for environments where noise reduction is a priority. Its low sound levels contribute to an overall pleasant restroom experience for users, promoting peace and comfort.

With an array of finishes available, the machine can seamlessly blend into various restroom designs while providing an eco-friendly alternative to traditional paper towels. The ML-55HS not only enhances user experience but also supports sustainability efforts by significantly reducing paper waste.

In conclusion, the American Dryer Corp ML-55HS brings together speed, efficiency, hygiene, and durability in a compact design, making it an excellent choice for any facility aiming to improve their restroom's functionality while catering to modern demands.
Top Page Image Contents