Manuals / American Dryer Corp / Laundry Appliance / Clothes Dryer

American Dryer Corp ML-55HS installation manual

Models: ML-55HS

1 56
Download 56 pages 61.68 Kb
Page 19
Image 19

NOTE: When the exhaust ductwork passes through a wall, ceiling, or roof made of combustible materials, the opening must be 2-inches (5.08 cm) larger than the duct (ALL the way around). The duct must be centered within this opening.

a.Outside Ductwork Protection

1)To protect the outside end of horizontal ductwork from the weather, a 90° elbow bent downward should be installed where the exhaust exits the building. If the ductwork travels vertically up through the roof, it should be protected from the weather by using a 180° turn to point the opening downward. In either case, allow at least twice the diameter of the duct between the duct opening and the nearest obstruction.

IMPORTANT: DO NOT use screens, louvers, or caps on the outside opening of the exhaust ductwork.

2.Single Dryer Venting

Where possible, it is suggested to provide a separate exhaust duct for each dryer. The exhaust duct should be laid out in such a way that the ductwork travels as directly as possible to the outdoors with as few turns as possible. It is suggested that the use of 90° turns in the ducting be avoided; use 30° and/or 45° angles instead. The shape of the exhaust ductwork is not critical so long as the minimum cross section area is provided.

IMPORTANT: Minimum duct size for a dryer that is vented horizontally is 8-inches (20.32 cm) for a round duct or an equivalent of 54 square inches (348.4 square centimeters). THE

DUCT SIZE MUST NOT BE REDUCED ANYWHERE DOWNSTREAM OF THE DRYER.

IMPORTANT: Exhaust back pressure measured by a manometer at each basket (tumbler) exhaust duct area must not exceed 0.3 inches (0.74 mb) of water column (W.C.).

IMPORTANT: Minimum duct size for a dryer that is vented vertically is 8-inches (20.32 cm) for a round duct or an equivalent of 54 square inches (348.4 square centimeters). THE

DUCT SIZE MUST NOT BE REDUCED ANYWHERE DOWNSTREAM OF THE DRYER.

15

Page 18 Page 20
Page 19
Image 19
American Dryer Corp ML-55HS installation manual
Page 18 Page 20

ML-55HS specifications

The American Dryer Corp ML-55HS is a high-performance hand dryer that offers efficient and effective drying solutions for commercial and public restrooms. Known for its innovative design and advanced technology, the ML-55HS is a popular choice among facility managers looking for a reliable and eco-friendly drying option.

One of the key features of the ML-55HS is its powerful motor. With a speed of up to 28,000 RPM, this hand dryer can dry hands in as little as 10 to 15 seconds, significantly reducing wait times in busy facilities. This high speed also helps to minimize energy consumption, making the dryer not only time-efficient but also cost-effective.

The dryer is equipped with a built-in HEPA filter that captures 99.97% of airborne particles down to 0.3 microns. This means that users can enjoy not only the convenience of a fast-drying hand-drying solution but also a hygienic one, preventing the spread of germs and bacteria in shared spaces. The HEPA filter is easy to replace, ensuring ongoing efficiency and cleanliness.

Another notable aspect of the ML-55HS is its adjustable speed and heat settings. This versatility allows users to customize their drying experience based on their preferences, ensuring optimal comfort for everyone—regardless of the season or environment. Such adaptability also helps to further conserve energy.

The design of the ML-55HS is both sleek and durable, made from high-quality materials that can withstand the rigors of daily use in high-traffic areas. Its vandal-resistant features, including a tamper-proof cover and concealed screws, ensure that the dryer maintains its integrity even in challenging environments.

Moreover, the ML-55HS operates quietly, making it suitable for environments where noise reduction is a priority. Its low sound levels contribute to an overall pleasant restroom experience for users, promoting peace and comfort.

With an array of finishes available, the machine can seamlessly blend into various restroom designs while providing an eco-friendly alternative to traditional paper towels. The ML-55HS not only enhances user experience but also supports sustainability efforts by significantly reducing paper waste.

In conclusion, the American Dryer Corp ML-55HS brings together speed, efficiency, hygiene, and durability in a compact design, making it an excellent choice for any facility aiming to improve their restroom's functionality while catering to modern demands.