G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms with local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: Failure to comply with these codes or ordinances, and/or the requirements stipulated in this manual, can result in PERSONAL INJURY and IMPROPER OPERATION of the dryer.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect the dryer from supply as noted can cause irreparable damage to the gas valve which will VOID THE WARRANTY.

WARNING: FIRE or EXPLOSION COULD RESULT.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the dryer label affixed to the backside of the upper control door. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the reseller who sold the dryer or contact the ADC factory.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) are made by changing each burner orifice. If this conversion is necessary, contact the reseller who sold the dryer or contact the ADC factory.

25

Page 28 Page 30
Page 29
Image 29
American Dryer Corp ML-55HS installation manual GAS Information
Page 28 Page 30

ML-55HS specifications

The American Dryer Corp ML-55HS is a high-performance hand dryer that offers efficient and effective drying solutions for commercial and public restrooms. Known for its innovative design and advanced technology, the ML-55HS is a popular choice among facility managers looking for a reliable and eco-friendly drying option.

One of the key features of the ML-55HS is its powerful motor. With a speed of up to 28,000 RPM, this hand dryer can dry hands in as little as 10 to 15 seconds, significantly reducing wait times in busy facilities. This high speed also helps to minimize energy consumption, making the dryer not only time-efficient but also cost-effective.

The dryer is equipped with a built-in HEPA filter that captures 99.97% of airborne particles down to 0.3 microns. This means that users can enjoy not only the convenience of a fast-drying hand-drying solution but also a hygienic one, preventing the spread of germs and bacteria in shared spaces. The HEPA filter is easy to replace, ensuring ongoing efficiency and cleanliness.

Another notable aspect of the ML-55HS is its adjustable speed and heat settings. This versatility allows users to customize their drying experience based on their preferences, ensuring optimal comfort for everyone—regardless of the season or environment. Such adaptability also helps to further conserve energy.

The design of the ML-55HS is both sleek and durable, made from high-quality materials that can withstand the rigors of daily use in high-traffic areas. Its vandal-resistant features, including a tamper-proof cover and concealed screws, ensure that the dryer maintains its integrity even in challenging environments.

Moreover, the ML-55HS operates quietly, making it suitable for environments where noise reduction is a priority. Its low sound levels contribute to an overall pleasant restroom experience for users, promoting peace and comfort.

With an array of finishes available, the machine can seamlessly blend into various restroom designs while providing an eco-friendly alternative to traditional paper towels. The ML-55HS not only enhances user experience but also supports sustainability efforts by significantly reducing paper waste.

In conclusion, the American Dryer Corp ML-55HS brings together speed, efficiency, hygiene, and durability in a compact design, making it an excellent choice for any facility aiming to improve their restroom's functionality while catering to modern demands.
Top Page Image Contents