![](/images/new-backgrounds/1198929/19892987x1.webp)
SECTIONVIII
DATA LABEL INFORMATION
When contacting American Dryer Corporation, certain information is required to ensure proper service/parts information from ADC. This information is on the data label located on the upper left side panel area behind the top control (access) door. When contacting ADC, please have the model number and serial number available.
1.MODEL NUMBER – Describes the size of the dryer and the type of heat (gas, electric, or steam).
2.SERIAL NUMBER – Allows the manufacturer to gather information on your particular dryer.
3.MANUFACTURING CODE NUMBER – The number issued by the manufacturer, which describes ALL possible options on your particular model.
4.TYPE OF HEAT – This describes the type of heat for your particular dryer, gas (either natural gas or liquid propane [L.P.] gas), electric, or steam.
5.HEAT INPUT (for GAS DRYERS) – This describes the heat input in British thermal units per hour (Btu/hr).
6.ORIFICE SIZE (for GAS DRYERS) – Gives the number drill size used.
7.ELECTRIC SERVICE – This describes the electric service for your particular model.
8.GAS MANIFOLD PRESSURE (for GAS DRYERS) – This describes the manifold pressure taken at the gas valve tap.
40 | American Dryer Corp. | 113344 - 9 |