G. GAS INFORMATION

It is your responsibility to have ALL plumbing connections made by a qualified professional to assure that the gas plumbing installation is adequate and conforms to local and state regulations or codes. In the absence of such codes, ALL plumbing connections, materials, and workmanship must conform to the applicable requirements of the National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1-M91 (Natural Gas) or CAN/CGA-B149.2-M91 (Liquid Propane [L.P.] Gas) or LATEST EDITION.

IMPORTANT: Failure to comply with these codes or ordinances, and/or the requirements stipulated in this manual, can result in personal injury and improper operation of the dryer.

The dryer and its individual shutoff valves must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig (3.5 kPa). The dryer must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure test of the gas supply system at test pressures equal to or less than 1/2 psig (3.5 kPa).

IMPORTANT: Failure to isolate or disconnect dryer from supply as noted can cause irreparable damage to the gas valve, which will VOID THE WARRANTY.

WARNING: FIRE OR EXPLOSION COULD RESULT.

1.Gas Supply

The gas dryer installation must meet the American National Standard...National Fuel Gas Code ANSI Z223.1-LATEST EDITION, or in Canada, the Canadian Installation Codes CAN/CGA-B149.1 M91 (Natural Gas) or CAN/CGA-B149.2-M91 (L.P. Gas) or LATEST EDITION, as well as local codes and ordinances and must be done by a qualified professional.

NOTE: Undersized gas piping will result in ignition problems, slow drying, increased use of energy, and can create a safety hazard.

The dryer must be connected to the type of heat/gas indicated on the dryer data label affixed behind the left coin control panel on the right wall. If this information does not agree with the type of gas available, DO NOT operate the dryer. Contact the reseller who sold the dryer or contact the ADC factory.

IMPORTANT: Any burner changes or conversions must be made by a qualified professional.

The input ratings shown on the dryer data label are for elevations up to 2,000 feet (610 meters), unless elevation requirements of over 2,000 feet (610 meters) were specified at the time the dryer order was placed with the factory. The adjustment or conversion of dryers in the field for elevations over 2,000 feet (610 meters) is made by changing each burner orifice. If this conversion is necessary, contact the reseller who sold the dryer or contact the ADC factory.

IMPORTANT: THIS GAS DRYER IS NOT PROVIDED WITH AN INTERNAL GAS SUPPLY SHUTOFF AND AN EXTERNAL GAS SUPPLY SHUTOFF MUST BE PROVIDED.

26

Page 30
Image 30
American Dryer Corp WDA-530D II, ADG-530D II installation manual GAS Information

WDA-530D II, ADG-530D II specifications

American Dryer Corp (ADC) has long been a leader in the manufacturing of high-performance commercial laundry equipment. Among its noteworthy offerings are the ADG-530D II and WDA-530D II models, both of which stand out for their advanced technologies, user-friendly features, and robust construction. These models are designed to meet the needs of laundromats, hotels, and other commercial laundry facilities, providing reliability and efficiency.

The ADG-530D II is a dual-pocket dryer that combines efficiency with superior drying performance. One of its main features is its powerful and energy-efficient heating system, which utilizes advanced airflow technology to reduce drying times while minimizing energy consumption. This model is equipped with a state-of-the-art microprocessor control system that allows for precise temperature and time settings, enhancing flexibility for various fabric types. Additionally, the ADG-530D II includes a large capacity that can accommodate various load sizes, making it an ideal choice for heavy daily usage.

On the other hand, the WDA-530D II model serves a slightly different purpose with a focus on wet cleaning. This innovative machine offers exceptional water extraction capabilities, ensuring that fabrics retain as little moisture as possible, which also contributes to quicker drying times. The WDA-530D II utilizes advanced technology to balance water levels and optimize washing cycles, thereby extending the life of the fabrics and improving overall cleanliness. Its easy-to-use interface simplifies operation, making it suitable for staff with varying levels of experience.

Both models incorporate durable construction materials designed to withstand heavy use in busy environments. Their design prioritizes ease of maintenance, featuring removable lint screens and efficient drainage systems that streamline cleaning and upkeep. User safety is also a priority, with built-in safety features to prevent overheating and ensure reliable operation.

In summary, the ADG-530D II and WDA-530D II by American Dryer Corp represent a blend of cutting-edge technology, user-friendly features, and robust design. Whether for drying or wet cleaning, these machines are engineered to enhance productivity in commercial laundry operations while delivering exceptional performance. Their commitment to energy efficiency and fabric care makes them an excellent investment for any laundry facility looking to enhance their operational efficiency and service quality.