IMPORTANT VENTING REMINDERS

1.Ductwork sizing and installation should be done by a qualified professional.

2.The dryer must be vented to the outdoors.

3.The ductwork should be routed as short as possible to the outdoors with as few turns as possible.

4.Avoid 90º turns, use 30º or 45º turns instead.

5.The size (cross-sectional area) of the ductwork will depend on the application (i.e., single dryer venting, common venting, etc.), as well as the length of the duct and the amount of elbows. DO NOT exceed the specifications noted in this manual.

IMPORTANT: UNDER NO CIRCUMSTANCES can the dryer be vented to the outdoors using a 6-inch (15.24 cm) diameter exhaust duct!!!

6.The inside of the ductwork should be as smooth as possible with no projections from the sheet metal screws.

7.ALL ducts should be taped to prevent moisture and lint from escaping into the building.

8.Inspection/clean out doors should be installed throughout strategic points in the ductwork for periodic inspection and cleaning.

9.Whenever the duct passes through combustible materials, the opening must be 2-inches (5.08 cm) larger than the duct (all the way around). The duct must be centered within this opening.

10.The outside of the ductwork must be protected from the weather. A 90º elbow must be used for a horizontal run and when going vertically through the roof by using a 180º turn to point the opening downward. The distance between the exhaust duct and the nearest obstruction (i.e., roof or ground) must be twice the diameter of the duct.

11.DO NOT use screens, louvers, or caps on the outside opening of the exhaust ductwork.

12.The ductwork exhaust outlets should not be located near make-up air openings. If make-up air openings are located too close to the exhaust outlet, lint and fumes may be drawn back into the dryer area through these openings.

13.Exhaust back pressure measured by a manometer at each basket (tumbler) exhaust duct must be no less than 0 and must not exceed 0.3 inches (0.74 mb) of water column (W.C.) when both baskets (tumblers) are operating.

IMPORTANT: It is recommended that exhaust or booster fans not be used in the exhaust ductwork system.

23

Page 26 Page 28
Page 27
Image 27
American Dryer Corp ADG-530D II, WDA-530D II installation manual Important Venting Reminders
Page 26 Page 28

WDA-530D II, ADG-530D II specifications

American Dryer Corp (ADC) has long been a leader in the manufacturing of high-performance commercial laundry equipment. Among its noteworthy offerings are the ADG-530D II and WDA-530D II models, both of which stand out for their advanced technologies, user-friendly features, and robust construction. These models are designed to meet the needs of laundromats, hotels, and other commercial laundry facilities, providing reliability and efficiency.

The ADG-530D II is a dual-pocket dryer that combines efficiency with superior drying performance. One of its main features is its powerful and energy-efficient heating system, which utilizes advanced airflow technology to reduce drying times while minimizing energy consumption. This model is equipped with a state-of-the-art microprocessor control system that allows for precise temperature and time settings, enhancing flexibility for various fabric types. Additionally, the ADG-530D II includes a large capacity that can accommodate various load sizes, making it an ideal choice for heavy daily usage.

On the other hand, the WDA-530D II model serves a slightly different purpose with a focus on wet cleaning. This innovative machine offers exceptional water extraction capabilities, ensuring that fabrics retain as little moisture as possible, which also contributes to quicker drying times. The WDA-530D II utilizes advanced technology to balance water levels and optimize washing cycles, thereby extending the life of the fabrics and improving overall cleanliness. Its easy-to-use interface simplifies operation, making it suitable for staff with varying levels of experience.

Both models incorporate durable construction materials designed to withstand heavy use in busy environments. Their design prioritizes ease of maintenance, featuring removable lint screens and efficient drainage systems that streamline cleaning and upkeep. User safety is also a priority, with built-in safety features to prevent overheating and ensure reliable operation.

In summary, the ADG-530D II and WDA-530D II by American Dryer Corp represent a blend of cutting-edge technology, user-friendly features, and robust design. Whether for drying or wet cleaning, these machines are engineered to enhance productivity in commercial laundry operations while delivering exceptional performance. Their commitment to energy efficiency and fabric care makes them an excellent investment for any laundry facility looking to enhance their operational efficiency and service quality.
Top Page Image Contents