American Dryer Corp ADG-530D II, WDA-530D II Failed keyboard touch pad label assembly

Models: WDA-530D II ADG-530D II

1 57
Download 57 pages 55.46 Kb
Page 49
Image 49

Possible reasons for overheating...

1.Restriction in location exhaust ductwork...

a.Dryer exhaust damper stuck in closed position.

b.Undersized exhaust ductwork.

2.Insufficient make-up air.

J.Microprocessor controller (computer) will not accept any, or only accept certain keyboard (touch pad) entries...

The “SEFL” display condition indicates a rotational sensor circuit failure, which means that there is a fault somewhere in the basket (tumbler) rotation detection circuit...or...the microprocessor controller (computer) program related to this circuit (PL01) is set incorrectly in the active mode (“SEn”) where the dryer is not equipped with the optional rotational sensor and should be set in the inactive mode (“nSEn”).

If the dryer is equipped with the optional rotational sensor and for whatever reason the microprocessor controller (computer) detects that the basket (tumbler) is not turning, it will disable ALL of the dryer outputs (shut the dryer down), and the light emitting diode (L.E.D.) display will read “SEFL.” The L.E.D. display will continue to read “SEFL” until the microprocessor controller (computer) is manually reset by closing and opening the program switch (PS).

Possible causes...

1.Loose/slipping (out of proper adjustment) basket (tumbler) belt.

2.Broken basket (tumbler) V-belt.

3.Failed motor (refer to Item B and Item E on page 42 and page 43).

4.Failure in the rotational sensor circuit...

a.Failed rotational sensor.

b.Loose connection or break between the rotational sensor and the microprocessor controller (computer).

K.Microprocessor controller (computer) will not accept any, or only accept certain keyboard (touch pad) entries...

1.Failed keyboard (touch pad) label assembly.

L.Microprocessor controller (computer) locks up and the L.E.D. display reads erroneous message(s) or only partial segments...

1.Transient power voltage (spikes)...disconnect power to the dryer, wait 1 minute (NOTE: for dryer models with optional battery backup...disconnect battery), then reestablish power to the dryer. If problem is still evident, proceed to Item M2 through Item M4.

2.Failed keyboard (touch pad) label assembly.

45

Page 49
Image 49
American Dryer Corp ADG-530D II, WDA-530D II installation manual Failed keyboard touch pad label assembly

WDA-530D II, ADG-530D II specifications

American Dryer Corp (ADC) has long been a leader in the manufacturing of high-performance commercial laundry equipment. Among its noteworthy offerings are the ADG-530D II and WDA-530D II models, both of which stand out for their advanced technologies, user-friendly features, and robust construction. These models are designed to meet the needs of laundromats, hotels, and other commercial laundry facilities, providing reliability and efficiency.

The ADG-530D II is a dual-pocket dryer that combines efficiency with superior drying performance. One of its main features is its powerful and energy-efficient heating system, which utilizes advanced airflow technology to reduce drying times while minimizing energy consumption. This model is equipped with a state-of-the-art microprocessor control system that allows for precise temperature and time settings, enhancing flexibility for various fabric types. Additionally, the ADG-530D II includes a large capacity that can accommodate various load sizes, making it an ideal choice for heavy daily usage.

On the other hand, the WDA-530D II model serves a slightly different purpose with a focus on wet cleaning. This innovative machine offers exceptional water extraction capabilities, ensuring that fabrics retain as little moisture as possible, which also contributes to quicker drying times. The WDA-530D II utilizes advanced technology to balance water levels and optimize washing cycles, thereby extending the life of the fabrics and improving overall cleanliness. Its easy-to-use interface simplifies operation, making it suitable for staff with varying levels of experience.

Both models incorporate durable construction materials designed to withstand heavy use in busy environments. Their design prioritizes ease of maintenance, featuring removable lint screens and efficient drainage systems that streamline cleaning and upkeep. User safety is also a priority, with built-in safety features to prevent overheating and ensure reliable operation.

In summary, the ADG-530D II and WDA-530D II by American Dryer Corp represent a blend of cutting-edge technology, user-friendly features, and robust design. Whether for drying or wet cleaning, these machines are engineered to enhance productivity in commercial laundry operations while delivering exceptional performance. Their commitment to energy efficiency and fabric care makes them an excellent investment for any laundry facility looking to enhance their operational efficiency and service quality.