G.The dryer does not start (for COIN MODELS ONLY)...coin(s) inserted and the light emitting diode (L.E.D.) display continues to read “FILL” and/or “Amount To Start” (does not read “PUSH”)...

1.Coin acceptor is not adjusted properly or is dirty with lint.

2.Failed coin acceptor switch.

3.Parameter in Program Location 01 (PL01) set incorrectly.

a.Bad coin program should be set for “bCrS” and not “bCLO.”

H.Microprocessor controller (computer) L.E.D. display reads “dSFL”...

1.L.E.D. display consistently reads “dSFL” and will not clear...

a.Microprocessor controller (computer) 1/8-Amp (Slo-Blo) fuse is blown.

b.Failed microprocessor controller (computer) temperature sensor.

c.Broken wire and/or termination in sensor harness somewhere between the sensor bracket and the microprocessor controller (computer).

d.Failed microprocessor controller (computer).

2.L.E.D. display reads “dSFL” for a short period of time (30-seconds or less) and then returns to the normal stop “FILL” mode...

NOTE: Once the microprocessor controller (computer) detects a problem, it updates every 30-seconds so that if a problem was a loose connection in this circuit which corrected itself, the “dSFL” display condition would automatically be canceled.

a.Loose wire and/or termination in sensor harness somewhere between the sensor bracket and the microprocessor controller (computer).

b.Failed microprocessor controller (computer) temperature.

I. Microprocessor controller (computer) L.E.D. display reads “Hot”...

The “Hot” display condition indicates a possible overheating condition. The microprocessor controller (computer) monitors the temperature in the dryer at ALL times. If the microprocessor controller (computer) detects that the temperature in the dryer has exceeded 220º F (104º C), it will disable ALL of the dryer outputs (shut the dryer down), the buzzer (tone) will sound for approximately 5-seconds, and the L.E.D. display will read “Hot.” The L.E.D. display will continue to read “Hot” until the temperature has dropped to 220º F (104º C) or lower and the microprocessor controller (computer) is manually reset by closing and opening the program switch (PS).

44

Page 48
Image 48
American Dryer Corp WDA-530D II, ADG-530D II Microprocessor controller computer L.E.D. display reads dSFL

WDA-530D II, ADG-530D II specifications

American Dryer Corp (ADC) has long been a leader in the manufacturing of high-performance commercial laundry equipment. Among its noteworthy offerings are the ADG-530D II and WDA-530D II models, both of which stand out for their advanced technologies, user-friendly features, and robust construction. These models are designed to meet the needs of laundromats, hotels, and other commercial laundry facilities, providing reliability and efficiency.

The ADG-530D II is a dual-pocket dryer that combines efficiency with superior drying performance. One of its main features is its powerful and energy-efficient heating system, which utilizes advanced airflow technology to reduce drying times while minimizing energy consumption. This model is equipped with a state-of-the-art microprocessor control system that allows for precise temperature and time settings, enhancing flexibility for various fabric types. Additionally, the ADG-530D II includes a large capacity that can accommodate various load sizes, making it an ideal choice for heavy daily usage.

On the other hand, the WDA-530D II model serves a slightly different purpose with a focus on wet cleaning. This innovative machine offers exceptional water extraction capabilities, ensuring that fabrics retain as little moisture as possible, which also contributes to quicker drying times. The WDA-530D II utilizes advanced technology to balance water levels and optimize washing cycles, thereby extending the life of the fabrics and improving overall cleanliness. Its easy-to-use interface simplifies operation, making it suitable for staff with varying levels of experience.

Both models incorporate durable construction materials designed to withstand heavy use in busy environments. Their design prioritizes ease of maintenance, featuring removable lint screens and efficient drainage systems that streamline cleaning and upkeep. User safety is also a priority, with built-in safety features to prevent overheating and ensure reliable operation.

In summary, the ADG-530D II and WDA-530D II by American Dryer Corp represent a blend of cutting-edge technology, user-friendly features, and robust design. Whether for drying or wet cleaning, these machines are engineered to enhance productivity in commercial laundry operations while delivering exceptional performance. Their commitment to energy efficiency and fabric care makes them an excellent investment for any laundry facility looking to enhance their operational efficiency and service quality.