features
Unshielded twisted pair (UTP) wiring video transmission enabled as standard
Supports NTCIP
Up to eight privacy zones
Two mounting base options
Programmable presets, patterns and area names
DirectSet feature provides fast access to the most frequently used dome features
96 presets store camera parameters (controller dependent)
16 patterns including expanded commands and duration
16 preset sequences
Alarm inputs and outputs
Password protection
Automatic home position
Automatic proportional flip and automatic gain control (AGC),
The camera’s 23x optical zoom is combined with a 10x digital magnifier, providing the power of a 230x total zoom.
The SpeedDome Ultra VII Day/Night with EIS can clearly distinguish scenes and colors in lighting conditions as low as 0.5 lux and 0.009 lux in black and white mode.
In addition to SensorNet, Manchester,
Up to eight different - sized privacy zones can be programmed to prevent users from viewing sensitive areas. The zones automatically change size proportionally.
The dome maintains statistics on how long it has been on, duration of pan/tilt/zoom movements, number of presets selected and other usage information.
Users can adjust the white balance manually or have the camera set it automatically. White balance is normally compensated for by the auto tracking white balance. However, in some lighting conditions it may be necessary to manually adjust the red and blue settings for optimal viewing.
Users can set the automatic gain control (AGC) on/off, and when it is turned off, users can manually set the gain. AGC helps compensate for low lighting conditions.
Focus Preference provides continuous autofocus with manual override.
Users can set automatic dome flip on/off. With this feature turned on, the dome will automatically turn 180° when the camera tilts to its lower limits and stays in that position for a brief
The dome supports up to 16 patterns. Preprogrammed default spiral pan pattern (“apple peel”) covers the entire viewing area. Each pattern can store up to 99 commands each and be 10 minutes long.
The dome supports up to 16 preset sequences. Each sequence can store up to 16 presets and have a 10 minute dwell time per sequence.
DirectSet™ feature provides fast access to the most frequently used dome features, when used with a suitably equipped controller.
The dome supports up to 96 presets when used with suitably equipped controllers. Presets now store camera parameters such as EIS and IR mode settings and AGC level.
Using the Freeze Frame feature before moving to a preset minimizes hard drive usage when video is digitally recorded.
Zoom adjusted programming (ZAP) automatically adjusts pan and tilt speeds in proportion to zoom position, even at maximum magnification.
Instant digital zoom immediately activates your digital zoom settings (once the focus reaches the end of the optical zoom range) every time you call a preset.
Alarms can be processed internally by the dome, externally by the controller or by both the dome and the controller. Each of the dome’s alarm inputs can automatically call a preset or run a pattern when the alarm is activated.
The dome supports up to 16 areas of various sizes. Users can assign names (up to 19 characters long) and boundaries to these areas.
Home position is the position that a dome returns to after it remains inactive for a specific period of time. This ensures that even when the dome is unattended, it will always be pointing to a key area of the facility. The user can define that preset, sequence or pattern and also how long (from 1 to 60 minutes) before a dome returns to its home position.
The dome generates
