American Power Conversion 5000I user manual Specifications, RM Unit, Tower Unit

Specifications

Acceptable input voltage	0 - 325 VAC
Output voltage	196 - 253 VAC
Input protection	Resettable circuit breaker
Frequency limits (on-line operation)	47 - 63 Hz
Transfer time	2 ms typical, 4 ms maximum
Maximum load, total	5000 VA/3750 W
On-battery output voltage	220, 225, 230, or 240 VAC
On-battery frequency	50 or 60 Hz, 0.1 Hz;
	unless synchronized to utility during brownout
On-battery waveshape	Low-distortion sine wave
Overload protection (on-battery)	Overcurrent and short-circuit protected, latching shutdown on overload
Noise filter	Normal and common mode EMI/RFI suppression,
	100 kHz to 10 MHz
Battery type	Spill proof, maintenance free, sealed lead-acid
Typical battery life	3 to 6 years, depending on number of discharge cycles
	and ambient temperature
Typical recharge time	2 to 5 hours from total discharge
Operating temperature	0 to 40ΓC (+32 to +104ΓF)
Storage temperature	-15 to +45ΓC (+5 to +113ΓF)
Operating and storage relative humidity	0 to 95%, non-condensing
Operating elevation	0 to +3,000 m (0 to +10,000 ft.)
Storage elevation	0 to +15,000 m (0 to +50,000 ft.)
Electromagnetic Compatibility (EMC)	EN50091-2
Electromagnetic Interference (EMI)	EN55022 Class A
Electromagnetic Immunity	IEC 801-2, 801-3, 801-4, 801-5, 1000-2-2
	EN60555-1, -2, -3, EN61000-4-1, EN61000-4-11
Audible noise in dBA at 1 m (3 ft.)	z55
Safety approvals	GS licensed by VDE to EN50091-1-1 and 60950
Rack Mount Units	RM Unit
Size (W x H x D)	43.2 x 19.6 x 62.2 cm
	(17.0 x 8.7 x 24.5 in.)
Weight - net (shipping)	205 (235) lb.
	93 (106.6) kg
Tower Units	Tower Unit
Size (W x H x D)	19.6 x 43.2 x 62.2 cm
	(8.7 x 17.5 x 26.0 in.)
Weight - net (shipping)	200 (240) lb.
	93 (106.6) kg

990-7032A, Revision 3 7/01 12