ADDENDUM | NetworkAIR ACPA4000 |
®
6.On the “Configuration Summary” screen, verify the selections you made.
Be sure that you select only settings that you want to reconfigure so that you do not accidentally overwrite settings of the deployed Network Management Card. All settings that have YES in the Send column of the “Configuration Summary” screen will be transmitted.
Click the appropriate buttons to save and print the summary. If you save the settings, you can load them into the Wizard later. Click Next >.
7.Select the Remotely (over network via FTP Server) option from the “Transmit Current Settings” screen, and then click Next >.
8.On the “Remote File Transfer” screen, add the IP addresses of the Network Management Cards that you want to reconfigure. If the deployed Network Management Cards have different settings for the Administrator User Name, Password, and FTP Server Port, change the values reflected in the Wizard. If you have a saved list of Network Management Card IP addresses, you can load them by clicking Load…. Click Next > to continue.
9.Click Apply in the “Remote File Transfer via FTP” screen to transmit the new settings to all of the Network Management Cards specified in the preceding step. After you transmit the settings to all of the Network Management Cards, a transmission log is available. To save, print, or clear the log, click the appropriate button.
9
