![](/images/new-backgrounds/1266503/2665035x1.webp)
ADDENDUM | NetworkAIR ACPA4000 |
®
System requirements
The Wizard runs on Windows® 98, Windows NT®, Windows 2000, Windows 2003, and Windows XP
The Network Management Card Wizard uses FTP to transfer files. If you are using Secure CoPy (SCP) and have disabled the FTP server, you must temporarily enable it to use the Wizard to configure settings of a Network Management Card.
Configuring Network Management Card settings
Using the Wizard, you can configure basic settings locally or remotely for the Network Management Cards. The Wizard cannot configure the following settings for the Network Management Card:
•Event action settings
•Email settings
•DNS settings
Installing the Wizard
If autorun is enabled on your CD drive, a page will open automatically in your browser when the CD is inserted. Navigate to the Management Card Wizard page, and select Install the Wizard. Otherwise, run the setup.exe installation program found in the Wizard directory and follow the
Online Help
To access the Wizard’s online help, click Help at the lower left on the Wizard screen.
2