American Power Conversion AIRACPA4000 manual Use FTP or SCP to upgrade one Network Management Card

ADDENDUM NetworkAIR ACPA4000

®

Use FTP or SCP to upgrade one Network

Management Card

For you to be able to use FTP to upgrade a single Network Management Card over the network:

•The Network Management Card must be connected to the network.

•The FTP server must be enabled at the Network Management Card.

•The Network Management Card must have its TCP/IP settings (System IP, Subnet Mask, and Default Gateway addresses) configured.

To use FTP to upgrade the Network Management Card:

1.Open an MS-DOS command prompt window on a computer that is connected to the network. Go to the directory that contains the firmware upgrade files, and list the files. (For the directory C:\apc, the commands would be those shown in bold):

C:\>cd\apc C:\apc>dir

Files listed for a Network Management Card, for example, might be the following:

–apc_hw02_aos_228.bin

–apc_hw02_nairpa_106.bin

15