will indicate an overload.
4.8.8
4.9 Input Plug Incompatibility
The UPS is furnished with a
4.9.1If the service wiring has been installed correctly using one of the receptacle types listed below, a qualified electrician may be called to replace the receptacle with an
λ
λ
λ
λ
λ
λ
λ
λ
λ
4.9.2If the service wiring has been installed correctly using one of the receptacle types listed below, a qualified electrician must be called to install new service wiring for the UPS. In general, these receptacle types are used at installations where only 120V service is available or where no service ground exists. The receptacle type is normally embossed on the receptacle face (the suffix "R" may not be present).
λ
λ
λ
λ
λ
λ
λ
λ
5.0Operation
5.1Modes of Operation
When switched on, the UPS will operate in any of five modes of operation depending upon the condition of the UPS, the UPS’s batteries, the UPS’s loads, and the input utility voltage. These five modes are sleep, standby,