1-8
Down Arrow Push Button
This pushbutton is used to change (decrease or turn off) parameters for
various user-selectable settings such as: Audible Alarms, Sensitivity,
Display Dimmer, LED Dimmer, Go To Bat If, Outlet 1 & 2 Delay
(in seconds), Low Bat Warning, Bat Rep Date, and so on.
On/Off Switch
This switch controls power to all of the 12 outlets located on the rear of
the unit. APC recommends the unit be left ON at all times. Control power
to your system components as you normally would, instead of using the
ON/OFF Switch.
SETUP Push Button
This pushbutton is used to advance the display through the various
user-selectable setup functions provided by the unit such as: Audible
Alarms, Sensitivity, Display Dimmer , LED Dimmer, Go To Bat If,
Outlet 1 & 2 Delay (in seconds), Low Bat Warning, Bat Rep Date,
and so on.
REGULATING Status Indicator
When this (blue) indicator is lit, it indicates automatic voltage regulation
(AVR) is enabled and operating to correct low or high voltage conditions.
DELAYED 2 Status Indicator
When this (blue) indicator is lit, it indicates that conditioned power is
being supplied to equipment connected to the rear-panel outlets marked
Switched Delayed 2.
10
11
12
13
14