2-18
SCREEN SAVER: ON/OFF Setting — This function, shown in Figure 40, allows
you to force the unit to continuously alternate a message S20 POWER
CONDITIONER WITH BATTERY BACKUP between the two lines of fields on
the VFD. This feature helps to maintain display quality, as well as extending the life
of the VFD.
Note:Even when the screen saver is set to ON, the screen saver message will
only display when the system load is less than 5%.
Figure 40. SCREEN SAVER Screen
RESET TO DEFAULT: YES/NO Setting — This function, shown in Figure 41,
allows you to force the unit to reset all previous settings to the factory default values.
Simply advance to this screen, then press either the Up Arrow or Down Arrow
pushbutton. The system will display two messages:
INITIALIZING SETUP TO FACTORY DEFAULT
and
INITIALIZATION COMPLETE.
The system then returns to the RESET TO DEFAULT screen.
Figure 41. RESET TO DEFAULT Screen
SCREEN SAVER:OFF
PRESS ↑ ↓ TO CHANGE
RESET TO DEFAULT:NO
PRESS ↑ ↓ TO CHANGE