11
SMART-UPS REAR PANEL 230V models 120V/100V models
BASIC CONNECTORS
Serial Port
Power management software and interface kits can be used with the
UPS. Use only interface kits supplied or approved by APC. If used,
connect the interface cable to the 9-pin computer interface port. Secure
the connector screws to complete the connection.
Use an APC supplied cable to connect to the Serial Port.
DO NOT use a standard serial interface cable since it is incompatible with the UPS
connector.
If both Serial and USB Ports are provided they cannot be used simultaneously.
Use the battery pack connector to connect optional external battery
pack(s). These units support up to ten external battery packs.
See the APC web site, www.apc.com/support for the correct external
battery pack model number for your UPS.
TVSS Screw
120V/100V models only: The UPS features a transient voltage surge-
suppression (TVSS) screw for connecting the ground lead on surge
suppression devices such as telephone and network line protectors.