1: SAFETY INFORMATION
American Power Conversion Corporation (APC) is the leading national and international manufac- turer of
The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags, and surges from reaching your computer and other valuable electronic equipment. The UPS filters out small utility line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line. The UPS provides continuous power from its internal battery until the utility line returns to safe levels.
Changes or modifications to this unit not expressly approved by the party respon- sible for compliance could void the warranty.
HANDLING SAFETY
The UPS requires two people for installation due to its weight. To lighten the UPS, you may remove the battery while you position or mount it in the rack. Refer to the Operation Manual for instructions on how to remove the battery.
<18 kg (<40 lb) |
>55 kg (>120 lb)
nEquipment with casters is built to move on a smooth surface without any obstacles.
nDo not use a ramp incline of more than 10°.
nThis equipment is intended for installation in a
ELECTRICAL SAFETY
nDo not work alone under hazardous conditions.
nHigh short circuit current through conductive materials could cause severe burns.
nA licensed electrician is required to install permanently wired equipment.
nCheck that the power cord(s), plug(s), and sockets are in good condition.
nTo reduce the risk of electric shock when grounding, disconnect the equipment from the AC power outlet before installing or connecting to other equipment. Reconnect the power cord only after all connections are made.
nDo not handle any kind of metallic connector before the power has been removed.
1 |
