STACKING THE UPS ON A BATTERY PACK
Note: For rack mounting, proceed to Mounting the UPS in a Rack, below.
Ba t t e r y P a c k
0
1.Unpack the four mounting feet shipped in the mounting kit.
2.Turn the UPS on its side so the bottom surface is accessible.
3.Locate the indentations on the bottom of the UPS that mark the feet positions (indicated by arrows in the figure at left).
4.Peel away the protective film on the back of one foot, align the adhesive side with an indentation on the UPS, and press hard to affix the foot to the UPS. Repeat this step for all feet.
5.Turn the UPS right side up and place it either on the floor on an optional battery pack (shown). The battery pack cover has indentations to accommodate the feet on the bottom of either a UPS or another battery pack.
Do not step on the UPS. The UPS chassis is not designed to support additional weight.
6.Continue with Connecting the Battery and Attaching the Front Bezel, to complete the installation.
MOUNTING THE UPS IN A RACK
The UPS comes with standard
The UPS is heavy. To lighten it, you may remove the battery before mounting the unit in the rack. If you do not want to remove the battery, continue with Mounting the UPS in a Rack (next page).
4 |
