Smart-UPS 2200/3000 VA XL 120/208/230 VAC Tower/Rack-Mount 5U User Manual 5
Rack-Mount Configuration
This unit is intended for mounting in a two post rack. To order a four post rack-mount kit contact your dealer or
refer to the APC Web site, www.apc.com.
Tower to rack-mount conversion procedure
The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS during
installation.
Remove the top cover and .
Remove and rotate the display
panel .
A four post rack configuration requires installation
of two brackets in the forward position (see diagram
above), two cleats (supplied with this unit), and the
four post rails. The rails can be ordered through the
APC Web site www.apc.com.
Pull the battery disconnect
strap attached to the battery
connector. DO NOT pull
the battery cables to
disconnect the battery. Disconnect
Battery
Battery
Disconnect
Strap Foam
Spacer
x4
5/8 in
1.6 cm
Four post rack-mount
bracket position Two post rack-mount
bracket position