Appendix B: AMIBIOS POST Diagnostic Error Messages
Check
PointDescription
87The programming before WINBIOS Setup has been completed . Uncompressing the WINBIOS Setup code and executing the AMIBIOS Setup or WINBIOS Setup utility next.
88Returned from WINBIOS Setup and cleared the screen. Performing any necessary programming after WINBIOS Setup next.
89The programming after WINBIOS Setup has been completed . Displaying the power - on screen message next.
8B | The first screen message has been displayed . | The |
| <WAIT...> message is displayed. Performing the PS/2 | |
| mouse check and extended BIOS data area allocation | |
| check next. |
|
8C | Programming the WINBIOS Setup options next. |
|
8D | The WINBIOS Setup options are programmed . | |
| Resetting the hard disk controller next. |
|
8F | The hard disk controller has been reset. Configuring | the |
| floppy drive controller next. |
|
91The floppy drive controller has been configured . Configuring the hard disk drive controller next.
95Initializing the bus option ROMs from C800 next.
96Initializing before passing control to the adaptor ROM at C800.
97Initialization before the C800 adaptor ROM gains control has been completed. The adaptor ROM check is next.
98The adaptor ROM had control and has now returned
control to BIOS POST . Performing any required processing after the option ROM returned control.
APPENDIX B
