SUPER PIIIDM6/PIIIDM4/PIIIDM3/PIIIDME User's Manual
Installation
PWR_ON
The PWR_ON connection is lo- cated on pins 11 and 13 of JF1. Momentarily contacting both pins will power on/off the system. The user can also configure this but- ton to function as a suspend but- ton. (See the Power Button Mode setting in BIOS.) To turn off the power when set to suspend mode, hold down the power button for at least 4 seconds. See Table
Table
PWR_ON Connector
Pin Definitions
(JF1)
Pin |
|
N u m b e r | Definition |
1 1 | P W _ O N |
1 3 | G r o u n d |
|
|
NIC_LED
The Network Interface Controller LED connection is located on pins 12 and 14 of JF1. Attach the NIC LED cable to these pins to display network activity. See Table
Table
NIC_LED Pin
Definitions
(JF1)
Pin |
|
N u m b e r | Definition |
1 2 | + 5 V |
1 4 | G N D |
|
|
Reset
The Reset connection is located on pins 15 and 17 of JF1. This connector attaches to the hard- ware reset switch on the com- puter case. See Table
I2C
The I2C connection is located on pins 16 and 18 of JF1. See Table
Table 2-7 Reset Pin Definitions (JF1)
Pin |
|
N u m b e r | Definition |
1 5 | Reset |
1 7 | G r o u n d |
|
|
Table
I2C Pin Definitions
(JF1)
Pin |
|
N u m b e r | Definition |
1 6 | S D A |
1 8 | S C L |
|
|