American Power Conversion UXI/UXICH User Configurable Items, Output Voltage Setting, 200 VAC

USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, OPTIONAL SMART SLOT ACCESSORY CARDS, OR TERMINAL MODE.

FUNCTION	FACTORY	USER SELECTABLE	DESCRIPTION
	DEFAULT	CHOICES
Automatic Self-Test	On start-up and	On start-up and every 7	Set the interval at which the
	every 14 days,	days thereafter	UPS will execute a self-test.
	thereafter	On start-up and every 14
		days thereafter
		On start-up only
		No self-test
Date of Last Battery	Manufacture date	Date of	Reset this date when you replace
Replacement		battery replacement	the battery modules.
Minimum Run Time	0 seconds	0 to 3600 s of run time	Specify the minimum run time
Before Return from			following a low battery
Shutdown			shutdown, before powering
			connected equipment.
Audible Alarm	ON	ON, OFF	Enable or disable all alarms
Setting			permanently.
Simple Shutdown	90 seconds	0 to 1800 s	Set the interval between the time
Delay			when the UPS receives a simple
			shutdown command and the
			actual shutdown.
Simple Low Run	150 seconds	0 to 1800 s	Change the warning interval
Time Warning			default to a higher setting if the
			operating system requires a
			longer interval for shutdown.
			The low battery warning beeps
			are continuous when 150
			seconds of run time remain.
High Bypass Point	255 VAC	Output Voltage Setting	Maximum voltage that the UPS
		200 VAC:	will pass to connected
		210 - 280 VAC	equipment during internal
			bypass operation.
		208 VAC:
		220 - 280 VAC
		220 VAC:
		235 - 280 VAC
		230 VAC:
		245 - 280 VAC
		240 VAC:
		255 - 280 VAC
		9