BASIC CONNECTORS

 

 

 

 

 

 

 

Power management software and interface kits can be used with the UPS.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use only cables approved by APC.

serial com

 

 

Any other interface cable will be incompatible with the UPS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connector.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual bypass enables the user to manually put connected equipment into

 

 

 

 

 

 

 

 

 

 

 

 

bypass mode.

normal bypass

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emergency Power Off terminal allows the user to connect the UPS to the

 

 

 

 

 

 

 

 

 

 

 

 

central EPO system.

EPO terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The UPS features a transient voltage surge-suppression (TVSS) screw for

 

 

 

 

 

 

 

 

 

 

 

 

connecting the ground lead on surge suppression devices such as telephone

TVSS screw

 

 

and network line protectors.

 

 

When connecting grounding cable, disconnect the unit from the utility

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power outlet.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

External battery packs must be connected to these connectors located on

 

 

 

 

 

 

 

 

 

 

 

 

 

the rear panel of the unit.

external battery

 

 

 

 

pack connector

 

 

 

 

 

 

 

5000 VA models

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

output circuit breakers

3

Page 5
Image 5
American Power Conversion UXI/UXICH user manual Normal bypass