American Standard 1742 Series installation instructions Series Whirlpool/Bathing Pool, Thank You

COLONY OVAL™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

1742 SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

			ON/OFF
			SWITCH		1803 mm
			292 mm		(71)		▲OUTLINE OF
			(11-1/2)				CUTOUT-USE
							TEMPLATE
SEE FTTG.SPECS
FOR DIMENSION
C OF SUPPLIES
L
			305mm(12) X 229 mm(9)				PUMP MAY
							EXTEND
			CUTOUT IN FLOOR FOR DRAIN				TO THE RIM
1041 mm
(41)
535mm
(21)							PROVIDE ACCESS
							TO PUMP FOR
98mm			(2) AIR VALVES				SERVICING ON ALL
							INSTALLATIONS
(3-7/8)
			CL OF DRAIN
			OUTLET
						C/L OF
			C/L OF		SHOWER ARM
			VALVES
82mm					C/L OF
(3-1/4)			102mm
	305mm				SPOUT
51mm		(12)	(4)
(2)							1651-1981mm
							(65-78)
							OPTIONAL
605mm
(23-7/8 )
555mm
(21-7/8)							ROUGH
							FLOOR
BATH			1-1/2 N.P.T.M.
SUPPORT					35mm
			THREADS
MATERIAL
					(1-3/8)
			1-1/2 O.D.			98mm
			TAILPIECE			(3-7/8)
		GENERAL SPECIFICATIONS FOR 1742 WHIRLPOOL
INSTALLED SIZE				71 x 41 x 23-7/8 In.(1805 x 1040 x 606mm)
WEIGHT							119 Lbs. (54 Kg.)
WEIGHT w/WATER							680 Lbs. (308 Kg.)
GAL. TO OVERFLOW							67 Gal. (254 L)
WHIRLPOOL MIN. OPERATING VOL.							50 Gal. (190 L)
BATHING WELL AT SUMP						49 x 26 In. (1245 x 660mm)
BATHING WELL AT RIM						62 x 34 In. (1588 x 864mm)
WATER DEPTH TO OVERFLOW							16-7/8 In. (429mm)
FLOOR LOADING					32 Lbs./Sq.Ft. (157 Kgs./Sq.m)
(PROJECTED AREA)
			WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP						1.1 HP, 9.9 AMPS, 120V.

GENERAL INSTALLATION INFORMATION

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Required Components (not included):

•Drain 1583.470*

•Bath Filler*

* see your American Standard Distributor

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFCI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

IMPORTANT: Water test unit before installation and enclosure!

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. AFTER INSTALLATION, AND

BEFORE ENCLOSING WITH WALLBOARD, TILE, ETC., WATER TEST THE UNIT AND CHECK FOR LEAKS.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2004

753571-100All product names listed herein are trademarks of American Standard Inc. unless otherwise noted.