8
Note: Center the cutout Horizontally on the unit. For purposes of clarity, the above
illustration�is not drawn to scale.
7.62cm
3"
MCD301 Bottom View in Custom Cabinet
2.54cm
1"
Support Shelf
MCD301 Side View in Custom Cabinet
Cabinet Front Panel
MCD301 Front Panel
Custom Cabinet Cutout
The MCD301 can be placed upright on a table or shelf, standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MCD301 when it is custom installed as outlined below. The four feet togeth- er with the mounting screws should be retained for possible future use if the MCD301 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MCD301. Cool operation
ensures the longest pos-
sible operat-
ing life for any electronic
instrument.
Do not install the MCD301 directly above
a heat generat- ing compo- nent such as a high powered amplifier. If
all the com- ponents are
installed in a
single cabinet, a quiet running
ventilation fan can be a
definite asset in maintaining
all the system components at the coolest possible oper- ating tempera-
ture.
A custom cabi- net installation should provide the follow- ing minimum spacing dimen-
sions for cool operation.
Installation
Installation
Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the SACD/CD Player, so that airflow is not ob- structed. Allow 17 inches (43.18cm) depth behind the front panel. Allow
17-1/16"
43.34cm
4-7/8"
12.38cm
02:38.31%
Cutout Opening for Custom Mounting
Cutout Opening for Ventilation
Chassis
2.70cm
15-1/2" 15-1/16"
39.37cm38.26cm
Cutout Opening for Ventilation
31.27cm
